Тут похожая проблема, только не понимаю, что сделать надо?
IRQ assignment errors
Jun 13 21:07:47 MBP kernel: [ 0.506231] ehci_hcd 0000:00:04.1: can't find IRQ for PCI INT B; please try using pci=biosirq
Jun 13 21:07:47 MBP kernel: [ 0.506522] ehci_hcd 0000:00:04.1: Found HC with no IRQ. Check BIOS/PCI 0000:00:04.1 setup!
Jun 13 21:07:47 MBP kernel: [ 0.506811] ehci_hcd 0000:00:04.1: init 0000:00:04.1 fail, -19
These errors can occur as a result of the "noefi" kernel parameter, which can cause problems with IRQ assignments for PCI devices (for instance SATA and USB controllers), so some devices might not be properly recognized. During kernel boot, you will enter a BusyBox prompt and the keyboard is unresponsive.
When the "noefi" option is used, a side effect on some models (eg MacBookPro5,3) is that booting straight into EFI mode does not work : an additional workaround is to first boot any OS in BIOS mode, then reboot in EFI mode. The fastest way is to boot grub BIOS, then press "c" for command-line, then type "reboot", then boot grub EFI, then select the Linux kernel. The cause of the problem or the reason why it acts as a workaround are unclear.